Bathroom Remodel Cost Estimator
Price a bathroom remodel from its size, scope, finish tier and state, then see where the money goes, what to hold back for surprises and how your number compares with 2026 cost data.
How to use the bathroom remodel cost estimator
This bathroom remodel cost estimator turns room size, scope, finish tier and state into a likely cost range, a line-item budget and the amount to set aside before you call contractors.
- Pick the bathroom type and enter the length and width in feet or meters.
- Choose the scope (minor refresh, partial remodel or full gut) and the finish tier.
- Pick your state, or tick the custom factor box if you already know how local prices compare with the national average.
- Tick any hidden costs you expect, set the contingency reserve and read the budget to set aside.
- When a contractor quotes a line, type it into the line-item table. That line then uses your number.
Copy summary puts the full estimate on your clipboard, ready for an email or a bid comparison sheet.
Ask two sources what a bathroom remodel costs in 2026 and you get $12,000 from Fixr (January 2026) and $15,586 from This Old House (2026). Both are national averages, and neither is wrong.
The gap comes from what each one averages. Fixr's range includes minor refreshes starting at $2,400, while This Old House's figure sits inside its own midrange band of $14,609 to $19,040.
A bathroom remodel cost estimator works from room size, scope, finish tier and location, and what it returns is a low-to-high price range, not a quote. Scope and finish tier move that range more than floor area does. Homeowners mostly use it to set a budget before they start collecting contractor bids.
What does a bathroom remodel cost estimator calculate?
Most estimators start with a size band or room dimensions and a bathroom type, such as a primary bath, a guest bath or a powder room.
Scope comes next, sometimes as a single choice and sometimes as a list of shower type, bathtub type, flooring, shower wall material, vanity style and countertop material.
Behind the brand differences, the inputs are mostly the same: room size (square footage or a size band), scope (a cosmetic update, a partial remodel or a full gut, plus whichever fixtures are being replaced), finish tier (budget, mid-range or high-end materials) and location. Location usually means a ZIP code or state, and it adjusts labor and permit costs.
What comes back is a low-to-high range, often with a cost per square foot and an itemized split by fixture or trade.
Tools differ a lot in how much they tell you. Many have a ZIP code field but never say how the ZIP changes the estimate, and publish no calculation method or data date. At least one free calculator is blunter about it: it uses a US national baseline plus a broad state or region adjustment and gives no ZIP-level pricing.
I wouldn't trust any range without a method note and a data date.
What is the average bathroom remodel cost in 2026, and why do sources disagree?
The 2026 averages land anywhere from $12,000 to $15,586, depending on whom you ask. Fixr's $12,000 comes with a typical range of $6,000 to $18,000, while This Old House lists $15,586 across a range of $6,456 to $24,715.
The other sources fall like this:
- Fixr's $12,000 average and $6,000 to $18,000 typical range were updated January 27, 2026
- Angi lands at $12,156, with most homeowners paying $6,651 to $17,661
- Houzz gives $12,350 to $13,650 as a national average, with no stated method or data date
- This Old House says $15,586 (July 2026 update)
- The Journal of Light Construction's 2025 Cost vs. Value Report shows a $26,138 job cost for a midrange bath remodel
Part of the spread is scope mix. Fixr's average spans minor jobs starting at $2,400 and full gut renovations of $30,000 or more, so the cheap refreshes pull it down. This Old House's $15,586 sits inside its own midrange band of $14,609 to $19,040 for a 50 square foot bathroom.
The sources also build their numbers differently. This Old House blends Homewyse pricing, the 2025 Journal of Light Construction Cost vs. Value Report and a 2026 survey of 1,000 homeowners who recently remodeled a bathroom. Angi bases its figure on 28,374 projects verified by its pros. Houzz states neither a method nor a date, which is why I'd give its figure the least weight.
The $26,138 isn't really comparable to any of them. The Cost vs. Value report prices 28 defined remodeling projects across 119 US markets, so that number describes one specific midrange job, not an average of everything homeowners do.
For a first budget, start from the midrange band for your scope and treat the headline average as a sanity check.
Bathroom remodel cost by size, type and scope
Scope sets the price more than floor area does. Fixr's January 2026 ranges put a minor refresh at $2,400 to $10,000 and a partial remodel at $6,000 to $25,000. A full gut runs $9,000 to $30,000 or more.
Timing is all over the place. Most projects take 2 to 12 weeks, though most homeowners see 2 to 4 weeks from start to finish. Surprise mold or water damage, or late material delivery, stretches that.
Cost by bathroom type
| Bathroom type | Typical range | Source |
|---|---|---|
| Half bath or powder room | $1,200 to $15,000 | Fixr |
| Guest bathroom | $3,500 to $20,000 | Fixr, Angi (via HomeLight) |
| Primary bathroom | $7,000 to $30,000 | Fixr, Angi (via HomeLight) |
| Wet room | $6,000 to $35,000 | Fixr |
Fixr's guest and primary ranges are identical to the Angi ranges that HomeLight reports, so treat them as one data lineage, not two independent confirmations. Angi's own page now lists $5,600 to $20,000 for an 80 square foot guest bath and $8,400 to $30,000 for a 120 square foot primary bath.
Cost by size and per square foot
Fixr puts the average at about $120 per square foot, within a range of $70 to $400 or more.
Its size table is just that rate range multiplied by floor area. A 40 square foot bathroom shows $2,800 to $16,000, which is exactly 40 times $70 and 40 times $400.
This Old House prices defined tiers on one 50 square foot room instead. Dividing its published totals by 50 gives roughly $170 to $218 per square foot for a basic refresh and $292 to $381 for midrange, while high-end jumps to $550 to $716.
They aren't actually in conflict. Fixr gives one wide rate band that covers every project type, whereas This Old House picks fixed finish levels and prices them in a single small room.
Floor area matters less than the tier. Across This Old House's size bands, a 40 to 60 square foot bath runs $12,695 to $14,845 and a primary bath of 130 square feet or more runs $22,370 to $24,715, which is under a 2x jump for a much bigger room. Take the same 50 square foot room from basic to high-end ($8,478 to $10,883 versus $27,492 to $35,808) and the price more than triples.
Small rooms run high per square foot because the toilet, vanity and shower cost the same in a 40 square foot bath as in a 100 square foot one. Use a per square foot rate as a rough check on larger rooms, and price fixtures line by line in small ones.
Where does the money go in a bathroom remodel?
Labor takes about half the budget, and the shower or tub and the vanity take about a quarter each. Fixr puts labor at 50% on average, ranging from 40% to 65% depending on the work.
These are Fixr's largest lines as of January 2026:
- The shower or tub takes 25% of the budget, or $1,500 to $4,500
- Vanity and shelving also take 25%, at $1,500 to $4,500
- Fixtures account for 10%, listed at $1,200 to $3,600 (that dollar range is Fixr's own, and 10% of its $6,000 to $18,000 typical range would be $600 to $1,800)
- Tile work, flooring included, is 10% at $600 to $1,800
- Countertops are 6%, or $360 to $1,100
- Permits are 4%, about $500
Utilities take 10%, and doors and windows and a budget cushion take 5% each, which fills out the rest. The shares add up to 100% on their own, so Fixr's 50% labor figure overlaps them instead of adding to them.
Permits and design fees fall under soft costs, with labor and materials on the hard side. Some estimators skip soft costs altogether, and Angi tells homeowners to add permit fees of $100 to $1,000 to the budget on top of its remodel figures.
How big is the labor share?
Most guides agree on the range. Bob Vila, citing Angi and HomeAdvisor, puts labor at 40% to 65% of the budget at $50 to $75 per hour, and Houzz says labor can make up at least 50% of the budget.
HomeLight is the odd one out. Its cost breakdown, which it attributes to the National Kitchen and Bath Association, puts labor at about 20% of the total. The sources do not say whether the two figures count the same work, so use the 40% to 65% range in an estimator, since Angi, HomeAdvisor, Bob Vila and Block Renovation all publish it.
Homeowners feel materials more than labor. In This Old House's 2026 survey, nearly 74% of respondents named materials the largest cost factor, which runs against the published labor shares.
Why line items from different sources do not mix
Fixr's shower or tub range is exactly 25% of its $6,000 to $18,000 typical budget. It describes a share of a typical remodel, not the price of a shower.
This Old House lists the average installed shower at $8,044 and plumbing at $5,545. The shower alone is about 1.8 times the top of Fixr's shower range, and mixing the two in one estimate double-counts some work and misses other work.
How much does location change the estimate?
Region shifts a midrange bath remodel by about 30% between high-cost and low-cost areas. In the Journal of Light Construction's 2025 Cost vs. Value data, the Middle Atlantic division shows $30,158 and West South Central shows $22,995, roughly 31% apart, against a national figure of $26,138.
| Division | Midrange bath remodel job cost | Factor vs. national |
|---|---|---|
| Middle Atlantic | $30,158 | 1.15 |
| Pacific | $27,710 | 1.06 |
| New England | $27,559 | 1.05 |
| West North Central | $26,879 | 1.03 |
| National | $26,138 | 1.00 |
| South Atlantic | $25,609 | 0.98 |
| Mountain | $24,920 | 0.95 |
| East North Central | $24,910 | 0.95 |
| East South Central | $23,409 | 0.90 |
| West South Central | $22,995 | 0.88 |
The estimator above uses these factors when you pick a state.
None of the consumer cost guides covered here publishes a regional multiplier. Fixr's guide gives national figures only.
This Old House stays qualitative. It points to higher labor rates in cities, strict permitting that raises costs, shipping premiums in remote areas and contractor premiums in high-demand markets.
Labor drives most of the gap. The Bureau of Labor Statistics lists a national median of $30.27 per hour for plumbers, pipefitters and steamfitters in May 2024, and its wage tables break that figure out by state and metro area.
A tool that applies only a national baseline with a broad state adjustment misses city-level premiums, and that includes the division factors here. Apply any local premium to the labor and permit lines first, since those are the lines the sources tie to location.
How to build a bathroom remodel estimate step by step
Work top-down, starting from the room and ending at the permits.
Once the budget firms up, contractors count tile, backer board and fixtures from the same measurements in a construction takeoff.
- Measure the room in square feet (length times width) and note whether the toilet, tub or vanity wall moves.
- Fix the scope as a minor refresh, a partial remodel or a full gut.
- Set a starting budget from the band for your scope and finish tier, not from the national average.
- Split it across line items, using one source's shares for the whole split and never a blend.
- Scale for region by multiplying by the local ratio, or replace lines with local quotes.
- Add permits and a contingency line. The next section sizes both.
Worked example: a 5x8 bathroom, partial scope
Start from a $14,000 midrange budget for 40 square feet. It is a stand-in, so swap in the figure from your own scope band. A 5 by 8 foot guest bath with partial scope, midrange finishes and the national average returns the same $14,000 in the estimator above.
| Line item | Budget |
|---|---|
| Shower or tub | $3,500 |
| Vanity and shelving | $3,500 |
| Fixtures | $1,400 |
| Tile and flooring | $1,400 |
| Countertops | $840 |
| Permits | $560 |
| Utilities, doors and windows, cushion | $2,800 |
The split applies Fixr's line-item shares to the $14,000 base, which is why every line comes from one source.
For the regional step, the Journal of Light Construction's midrange bath costs run about 1.15 times the national figure in the Middle Atlantic division and about 0.88 times in West South Central. Scaling the base gives about $16,150 in the Middle Atlantic and about $12,300 in West South Central.
The ratio was measured on total job cost, so it scales the whole estimate. When you hold local labor or permit quotes, use those lines in place of the ratio.
What should the contingency and hidden costs add to the estimate?
Plan on 10% to 20% of the estimate as contingency, and use the high end when demolition will expose original plumbing or subfloor. Angi's guideline is the same 10% to 20% of the budget for unforeseen expenses, and Houzz's remodeling guide advises a cushion of at least 10% to 20%.
On the $16,150 worked example, that comes to $1,615 to $3,230.
The 2026 U.S. Houzz & Home Study found that 37% of renovating homeowners exceeded their planned spend in 2025, while 35% hit budget and 3% finished under. That figure covers all renovation types, not bathrooms alone.
Fixr builds only a 5% cushion, at least $600, into its line items, which is half the low end of the Angi and Houzz range. If you allocate with Fixr's shares, raise that line to 10% to 20% instead of adding a second cushion. The estimator does exactly that: your reserve replaces the 5% cushion line in the budget to set aside.
Keep the money in its own construction contingency line so unused funds stay visible at the end.
Hidden costs after demolition
Fixr says hidden damage is commonly found once bathroom demolition starts. The usual line items look like this:
- Water damage repair runs $500 to $4,500 for an average bathroom, depending on the extent
- Mold remediation is $500 to $1,500 and up for an average bathroom
- Demolition, when billed separately, costs $600 to $2,300
- A layout designer adds $600 to $1,700
Most online estimators price none of these unless a field exists for them. That's what contingency is for, and why the estimator above lets you tick each one as an allowance.
Permit and code triggers
Code requirements shift the cost in a few places. Confirm the adopted code edition with the local building department before pricing, because jurisdictions adopt the model codes on their own schedules.
Most municipalities require building permits, especially when plumbing or electrical systems change. Some will not issue permits to unlicensed people, which limits DIY work.
On the electrical side, the National Electrical Code requires GFCI protection for all 125V through 250V receptacles in a dwelling unit's bathroom area (editions before 2020 covered only 15A and 20A, 125V receptacles), so every outlet you add or move needs a GFCI device. Since the 2023 edition, a factory-installed receptacle mounted inside a bathroom exhaust fan is exempt unless the fan's instructions or listing say otherwise.
The International Residential Code sets bathroom exhaust at a minimum of 50 cfm for intermittent operation or 20 cfm for continuous operation, and the fan must discharge outdoors, not into an attic, soffit cavity or crawlspace.
The IRC also lets a bathroom with an operable window (at least 3 square feet of glazing, half of it openable) skip the fan under section R303.3, and Fine Homebuilding notes the same for the 2009 and 2012 editions (R303.3 and M1507.3). Some jurisdictions require a fan regardless, so check the window with the local building department before you price a new duct run.
When does a bathroom remodel cost estimator stop being accurate?
It stops being accurate once the room differs from the inputs: a moved layout, scope that changes mid-project, or a spend level the calculator's data never saw. One calculator's own notes say actual costs vary with local labor rates, material availability, contractor schedule, permit requirements, site conditions and scope changes.
Moving fixtures is the classic way to break an estimate. Fixr warns that relocating plumbing or electrical rough-ins raises the total, with plumbers charging $75 to $150 per hour, and Houzz's guide recommends updates that avoid moving existing plumbing or wiring to keep costs down.
Scope drift does the rest of the damage. A calculator prices the scope you typed in, and every change after demolition starts falls outside its range.
Estimator, per square foot rate or contractor bid
| Method | Best for | What it misses |
|---|---|---|
| Online estimator | Early budget range from size, scope and tier | Site conditions, hidden damage, scope changes |
| Per square foot rate | Quick check on larger rooms | Fixed fixture costs in small rooms |
| Contractor bid | Final price for the actual room | Damage found after demolition |
Estimates versus what homeowners report spending
The 2026 U.S. Houzz Bathroom Trends Study puts median 2025 spending on bathroom upgrades at $15,000 nationally. Major remodels reach a $30,000 median at 100 square feet or more and $18,000 below that, with the top 10% of major projects at $70,000.
The $30,000 median sits above the typical-range ceiling of every national cost guide covered here.
The gap has an explanation. Houzz's spend medians come from a survey of its own registered users, and the study defines a major remodel as one that upgrades at least the shower, so the median describes a scope, not a market average.
For rooms of 100 square feet or more, test the calculator output against that survey median before relying on it.
Is a mid-range remodel the better spend?
For resale, yes. The Journal of Light Construction's 2025 Cost vs. Value report has the midrange bath recouping 80% at sale, against 61% for universal design and 42% for upscale. The report compares 28 remodeling projects with the value they retain at resale in 119 US markets.
What the resale data says
- The midrange bath returns $20,915 at resale, which is 80% of its cost
- Universal design costs $42,183 and returns $25,812, or 61%
- Upscale costs $81,612 and returns $34,000, or 42%
Put upscale next to midrange and the numbers get lopsided. The upscale job adds $13,085 more resale value for about $55,500 more cost, which is roughly 24 cents back on each extra dollar (arithmetic on the report's figures).
For a spending ceiling, the National Kitchen and Bath Association's general rule, as HomeLight reports it, is 5% to 10% of the home's value. On a $400,000 home, that is $20,000 to $40,000.
How to choose a tier
Midrange wins on return, but resale return isn't always the point of the project.
If you plan to sell within a few years, or the budget is fixed and finishes are the flexible part, midrange is the safer pick. Universal design or a higher tier makes more sense when you plan to stay and resale isn't what you're measuring. The same goes if accessibility needs are already known, or if a larger shower or wider doorway is the whole reason for the project.
Houzz's 2026 Bathroom Trends Study reports that homeowners are planning bathroom renovations around future needs and making room for larger showers. Cut finishes before cutting anything a code or inspector requires.
Bathroom Remodel Cost Estimator FAQ
Is a bathroom remodel different from a bathroom renovation?
No. Cost guides use the two terms interchangeably, so pricing under either name is comparable.
What actually matters is whether the layout changes. Moving fixtures raises the price, and the label doesn't.
How much does a tub-to-shower conversion cost?
Fixr lists $1,200 to $10,000 in total, with tub removal included.
The top of that range is more likely when the drain or valve moves, since plumbing changes raise the price of any layout change.
Does a DIY remodel save money?
On labor, yes, and labor is the biggest cost block in most budgets. Block Renovation notes that tile installation is often the single largest labor expense, so tile is where DIY saves the most and where mistakes cost the most to redo.
Materials, permits and any licensed trade work stay on the bill.
Can I finance a bathroom remodel with a HELOC?
Yes. A HELOC works as an open-end line of credit that lets you borrow repeatedly against your home equity, with a draw period that can last 10 years.
The home is collateral, and a variable rate can change your monthly payment even when you draw nothing more.
Does an FHA 203(k) loan cover a bathroom remodel?
Yes, when you buy or refinance a primary residence, because the rehabilitation cost rolls into a single mortgage. The Limited 203(k) covers minor, nonstructural work up to $75,000 with no minimum, while structural changes need the Standard version, which requires a consultant and at least $5,000 in repairs.
Do WaterSense fixtures raise the cost estimate?
At purchase, yes. Fixr says low-flow and smart features cost more upfront but may lower utility bills.
EPA's WaterSense label requires toilets at 1.28 gallons per flush or less, 20 percent below the 1.6-gallon federal standard.
Does an accessible bathroom cost more?
It can. Fixr says ADA-friendly design can add thousands to the total, though grants may be available.
The ADA sets accessibility dimensions for public buildings and does not require them in a private home, so the homeowner decides which features to include.
Checking Contractor Bids Against Your Estimate
Collect at least three itemized contractor bids and check each one against the range from the bathroom remodel cost estimator. Fixr and Angi both advise getting three or more quotes.
Compare bids line by line, because a low bid usually prices fewer lines, not the same lines for less. On the $16,150 worked example, a bid that omits separately billed demolition and permits looks $1,250 to $2,950 cheaper than it is.
Ask for three itemized bids on an identical scope, match their line items to the estimate with permits and demolition first, and keep the contingency reserve outside every bid.
The most complete bid is rarely the lowest, so picking it means paying more upfront to avoid add-on charges later.
Once a bid matches the estimate, the next document to read closely is the construction contract, where scope and payment terms are fixed.