Window Replacement Cost Estimator

List your windows by style, size and floor, pick the frame, glass and installation type, and get a low, typical and high installed price built on 2026 cost data.

Your windows

One row per window type. Measure the rough opening and use the smallest width and height.

    Product and installation
    Installation type

    Insert keeps the existing frame and trim. Choose full-frame when the frame shows rot or water damage.

    Location and home

    Based on 2025 Cost vs. Value regional job costs.

    Attached homes cost more per window to access and coordinate.

    Extra charges

    $175 to $1,000 per opening

    Pre-1978 homes. Cost guides publish no figure, so enter your contractor's itemized charge.

    Covers rot, access and trim surprises found once the old windows come out. 0 to 30%.

    Typical total$0

    Energy payback check

    Annual savings

    $0

    Payback on typical total

    0 yrs

    Payback range

    0 to 0 yrs

    ENERGY STAR's October 2023 figures model a whole-home replacement in a typical 2,376 sq ft house, so replacing only some windows saves less.

    How to use the window replacement cost estimator

    This window replacement cost estimator turns your window list into a low, typical and high installed total. It uses the same 2026 published prices as the guide below.

    1. Add one row per window type with its style, rough-opening size, quantity and floor.
    2. Pick the frame material, glass package and insert or full-frame installation.
    3. Set your region and home type, tick the extras your quote will include, then keep or change the 10% contingency.
    • Bay, bow and garden windows are priced as complete assemblies, so their size does not change the estimate.
    • Openings over about 30 sq ft count as custom sizes and never price below $1,000 each.
    • The default settings reproduce the 10-window worked example further down this page.

    A window replacement cost estimator gives you a range, never a quote, and two of them rarely agree. The 2026 published averages run from $517 to $800 per window. This Old House reports $517 from a 2026 survey of 1,000 homeowners. Fixr's January 2026 data puts it at about $800.

    That gap isn't an error. The two sources measure different things. This Old House builds its averages mainly from homeowner-reported costs, which are what people say they paid. Fixr publishes a typical installed range around its average.

    How does a window replacement cost estimator work?

    The math underneath is mostly multiplication. Take the number of windows, multiply by an installed unit price, then adjust for installation scope and location, with extras added on top.

    Total = window count x installed unit price x scope factor, plus extras, adjusted for region.

    Calculators start by asking how many windows you have and how big the rough openings are. From there it's style (single-hung, casement, bay), frame material and glass package. The last two inputs are installation type, insert or full-frame, and where the house is.

    What comes out is a low-to-high range that covers materials and labor. Labor averages about 30% of the total cost, according to Fixr's January 2026 data.

    Whatever dataset the publisher uses sets the unit prices inside the calculator. This Old House starts with homeowner-reported costs, then adds Homewyse data plus manufacturer, installer and retailer prices.

    Many calculators skip permits, trim work and repairs, which is where an estimate and a final quote tend to drift apart. That's why the estimator above lists them as separate extras.

    Treat the figure as a planning range and add a contingency allowance on top. Rot and access problems only show up once the old windows come out, and so does trim damage.

    What is the average window replacement cost in 2026?

    The honest answer is a spread. Published 2026 averages run from $517 to $800 per window, depending on who was measured and how.

    This Old House reports $517 per window and $7,183 per project, from a 2026 survey of 1,000 homeowners. Fixr lands at about $800 per window, with a typical range of $450 to $1,200 (updated January 21, 2026). Angi says $750 per window. Its Pros data adds a $7,347 average project across 17,857 verified jobs, with most projects between $3,436 and $11,836.

    The spread comes down to method. This Old House reports what homeowners say they paid. Angi counts verified Pro projects, and Fixr publishes a typical range around its average.

    Don't scale one figure into another, either. Multiply $517 by the survey's average of 7 windows per project and you get about $3,600, roughly half the $7,183 project average. Per-window and per-project numbers answer different questions.

    For budgeting, I'd treat the survey figure as a floor for basic vinyl double-pane work and plan around $750 to $800 as the midpoint.

    How does frame material change the estimate?

    Less than most calculators imply. In the survey averages, the five common materials sit close together.

    Frame materialThis Old House 2026 averageFixr range (Jan 2026)
    Aluminum$453$200 to $800
    Vinyl$472$350 to $800
    Composite$513$300 to $2,500
    Wood$544$600 to $2,000
    Fiberglass$564$400 to $1,500

    The real spread lives inside each material, and Fixr's ranges show it. Vinyl overlaps the bottom of the wood range, and composite alone stretches across more than $2,000.

    Material mostly decides the ordering. The final number depends more on size, style and glass, which is why the estimator scales its price by the survey's material ratios rather than swapping in a whole new range.

    Vinyl is the standard frame and balances upfront cost, durability and insulation. Aluminum is cheapest on average but insulates worst. People pick fiberglass for durability and dimensional stability. Wood is the one for premium materials and customization.

    Metal conducts heat, so aluminum frames without a thermal break act as thermal bridges and lose heat through the frame itself. In a cold climate, the lowest line on the table isn't the cheapest window to own.

    Andersen and Pella brand tiers

    Andersen runs $400 to $4,000 per window installed, with labor adding $100 to $500 (Fixr, 2026). Pella's own 2026 cost guide lists installed vinyl at $800 to $1,600 and fiberglass or wood at $1,100 to $2,200.

    Manufacturer figures sit above the survey averages. A calculator set to generic vinyl will understate a quote for a named brand, even when the frame material matches.

    How do window style and size affect the price?

    Style premiums come from hardware and assembly complexity. Single-hung and double-hung windows fall toward the lower end. Casement, awning and sliding windows cost more, and bay, bow and multi-window assemblies top the range.

    Window style price bands

    • Single-hung averages $474 (This Old House) and runs $250 to $700 (Fixr).
    • Double-hung comes in at $551, or $300 to $1,000.
    • Casement averages $529, with a range of $400 to $1,200.
    • Sliding windows run $531, and $700 to $1,500 at Fixr.
    • Picture windows come to $540 against $300 to $1,600.
    • Bay windows average $550, with Fixr at $900 to $4,500.

    Only Fixr prices the large and unusual styles, putting garden windows at $1,000 to $4,000 and bow windows at $1,500 to $8,000.

    The two sources don't even agree on the order. The survey ranks double-hung as the priciest of the eight styles on its cost page (awning at $545 and glass block at $505 are the two not shown above) and single-hung as the cheapest. Fixr puts sliding well above double-hung. The survey's bay average also sits below the bottom of Fixr's bay range.

    Survey averages blend many standard windows. Price bay, bow and garden units from Fixr's ranges, and standard styles from either source. The estimator uses Fixr's installed range for every style.

    Window size and custom openings

    Size raises the price, and Angi's size guide shows by how much. Small windows of about 18 x 24 to 24 x 36 inches run $200 to $600, standard 30 x 36 to 36 x 48 inch units $300 to $800, and large 48 x 60 to 60 x 72 inch units $700 to $1,800. Custom sizes cost more again. Fixr says you will almost always pay more for non-standard sizes, and its custom range starts at $1,000.

    Egress windows need a closer look. A basement egress job usually adds digging a window well and often cutting or enlarging the opening, so price that work next to the unit price.

    For the rough opening itself, take the width at the top, middle and bottom and the height along the left, center and right sides. Use the smallest reading from each set.

    What do glass packages add to the estimate?

    The glass package sets how much heat a window stops, and the price climbs with each step from single-pane to triple-pane.

    Glass packageThis Old House 2026 averageFixr range (Jan 2026)
    Single-pane$400$200 to $650
    Low-ENot priced separately$300 to $1,100
    Double-pane$529$450 to $2,000
    Triple-pane$609$1,000 to $4,000

    Fixr's triple-pane range starts far higher than the survey average, which sits only modestly above double-pane. The two sources are describing different windows, so go with whichever matches the product line in your quote.

    Low-E is the upgrade to price first. In a PNNL comparison of double and triple glazing, double-pane low-E glass with argon fill rates about U-0.25 to 0.29, and adding a second low-E coating brings it to about 0.19 to 0.25, overlapping triple-pane units at about 0.13 to 0.23.

    Argon fill, an inert gas sealed between the panes, improves insulation on top of that.

    Performance shows up on the label as the window's U-factor, the rate of heat transfer. Values generally run from 0.15 to 1.1, and a reading of 0.20 or lower likely indicates a triple-pane window, per the Building America Solution Center at PNNL.

    The solar heat gain coefficient (SHGC) sits beside it on the label. Both numbers come from the NFRC rating, and the ENERGY STAR label shows the climate zones where the window performs best.

    Go by climate zone rather than the brochure. PNNL's guidance points to triple-pane glass where heating loads dominate, so it's a poor line item for a mild-climate house.

    Insert or full-frame replacement: which installation type costs less?

    Insert replacement is the cheaper route because it reuses the existing frame. Full-frame replacement generally costs more due to additional labor and materials.

    Most guides stop short of a dollar figure for each method. Fixr says only that insert replacement carries a reduced fee. Angi is the exception, listing retrofit installation at $100 to $300 per window and full-frame at $180 to $1,500, and This Old House's insert versus full-frame guide repeats Angi's figures. The estimator adds the gap between those two bands, $80 to $1,200 per window, when you pick full-frame. Ask installers to price both.

    Insert jobs cost less, and the existing interior and exterior trim stays in place. Siding and drywall see less disturbance too. The trade is that the new unit sits inside the old frame, so glass area shrinks slightly, and any rot behind that frame stays hidden.

    Full-frame work is the better bet when something is wrong, since rot and water damage get repaired while the opening is exposed. The installer can redo the flashing and insulation around the frame, and the opening size can change. You pay for it in higher labor and material cost, finish work on the trim and siding afterward, and a longer job per window.

    Full-frame work also lets the installer air-seal and insulate the gap between the frame and the wall framing, which an insert job leaves behind the old frame.

    Labor changes with scope. Fixr puts removal and replacement at $150 to $300 for smaller windows and up to $800 for large bow or bay units. This Old House notes that second-story work and custom modifications push labor higher, as does rot or water repair.

    Insert makes sense when the frame is square, sound and dry. If it shows rot or water damage, go full-frame.

    Which extra charges do most estimates leave out?

    Most calculators stop at the window and the install, and several real costs sit outside that base price.

    Permits come first. A like-for-like swap may or may not need one, while changing the opening size or cutting a new opening generally does. Fixr puts permits at $50 to $300.

    Lead paint is the one that catches owners of older houses. Work in a house built before 1978 needs a certified firm using lead-safe practices.

    Disposal gets overlooked. Many contractors include removal and cleanup, but some charge extra, which ConsumerAffairs puts at $50 to $100 per window.

    Then there's trim and siding, meaning repairs to the interior and exterior finish after the old unit comes out. Angi lists window frame repairs at $175 to $1,000. Access matters too, since ground-floor windows cost less to replace than upper-level ones, and ConsumerAffairs adds $50 to $150 for each second-story window.

    A size change also triggers egress checks. Under IRC R310, a bedroom escape window must have a net clear opening of at least 5.7 square feet (5 square feet at grade floor). Clear height has to be at least 24 inches and clear width at least 20 inches. The sill can't sit higher than 44 inches, and the opening has to work from inside without keys or tools.

    The lead rule is federal. EPA's Renovation, Repair, and Painting rule requires anyone paid to disturb paint in a pre-1978 home to be trained and certified in lead-safe work practices. The rule's exemption for small paint disturbances does not apply to window replacement, which EPA treats as a covered activity whatever the square footage.

    None of the cost guides checked for this article prints a lead-safe surcharge. Ask the contractor to itemize it, then enter it in the estimator's lead-safe field.

    Trim damage is a smaller but real risk. In This Old House's 2026 survey, 9% of homeowners reported damage to walls or trim during installation.

    Ask for every extra as its own line item. A lump sum hides which ones are covered and can't be compared against an estimator range.

    How do window count, region and home type change the total?

    Window count sets the base total. Region shifts it by single-digit percentages, and home type decides how hard the job is.

    Number of windows and whole-house totals

    Angi's 2026 cost guides price whole-house jobs by window count. A job with 6 to 8 windows runs $4,500 to $6,000, and 8 to 12 windows run $6,000 to $9,000. At 12 to 16 windows the range is $9,000 to $12,000, and 16 to 20 windows cost $12,000 to $15,000. The estimator draws the matching band behind your range.

    Fixr runs higher at similar counts. It puts a single-story home with 10 to 15 windows at $8,000 to $12,000 and a two-story home with 15 to 30 at $12,000 to $24,000. ConsumerAffairs adds that manufacturers and installers typically take 10% to 15% off per window on bulk orders.

    Regional and home-type adjustments

    Remodeling's 2025 Cost vs. Value Report prices the same 10-window vinyl job at $20,171 in the West South Central region and $23,986 in the Middle Atlantic, against a national figure of $22,073. That is roughly 9% either way.

    The Angi and This Old House national figures used above are not broken out by region, so the Cost vs. Value spread is the best published basis for a regional adjustment. The estimator's region menu uses all nine of the report's regional job costs.

    Older homes generally cost more because of refitting, demolition, custom pieces and code compliance. Thompson Creek's 2026 guide puts per-window prices for townhomes and condos above single-family homes, at $1,000 to $1,800 and $1,100 to $2,000+ against $900 to $1,600, with condos adding approvals and building-wide rules.

    Apply whichever adjustment fits the house, because stacking all of them double counts.

    How to estimate the cost of replacing 10 windows, step by step

    Ten windows land between $3,000 and $10,000 before extras, assuming each falls in Angi's $300 to $1,000 band for a standard bedroom window.

    Start with a count. A quick takeoff of every opening, basement and attic windows included, fixes the multiplier before any price comes into it.

    1. Count every window and note the floor each one sits on.
    2. Record the smallest width and height for each rough opening.
    3. Choose the frame material and glass package, using the price tables above.
    4. Choose insert or full-frame installation and price each separately. Angi lists retrofit installation at $100 to $300 per window and full-frame at $180 to $1,500, which works as a cross-check on installer quotes.
    5. Multiply the count by the unit price, then add extras and a contingency.
    6. Apply the regional adjustment and compare the result against a published range.
    ScenarioUnit price10 windowsWith 10% contingency
    Low$300$3,000$3,300
    Mid$650$6,500$7,150
    High$1,000$10,000$11,000

    The unit prices come straight from Angi's $300 to $1,000 band, with $650 as the midpoint. Fixr's double-hung range is the same $300 to $1,000, so the estimator's default of ten standard vinyl double-hung windows returns exactly this table. The 10% contingency is an illustration, not a sourced figure.

    Against Angi's 8-to-12-window band, the mid scenario sits inside it, while the low one falls under and the high one runs over.

    Apply the regional band last. About 9% either way moves the mid scenario with its contingency to roughly $6,500 to $7,800.

    When does a window replacement cost estimator stop being reliable?

    An estimator holds up for the standard case, which is stock-size windows in ground-floor openings with sound frames. Move away from that and the range stops meaning much.

    Coastal jobs break the model first. In Florida and other hurricane-prone areas that require impact windows, 2026 contractor price guides put even an entry-level impact single-hung at roughly $1,000 to $1,500 installed, usually before permits.

    Old and historic houses fail it for a different reason, since refitting, demolition, custom pieces and code compliance all land on the same job. Condos and multi-unit buildings add approvals and building-wide rules that no calculator input captures.

    Hidden damage behind the frame is the biggest unknown. In This Old House's 2026 survey, 27% of homeowners paid more than their original quote and 61% paid about the same.

    Treat any quote, and any estimator, as a range around the final bill.

    How to read a contractor quote against the estimate

    A quote inside the range is typical market pricing. If it lands above the range, ask which line items explain the gap, since the contractor may see rot, access or custom work the tool did not price. A quote below the range deserves a check on what it leaves out, usually removal, trim or permits.

    Is window replacement worth the cost?

    Replacement pays back slowly on energy savings alone and partly at resale, so replace for failure first and savings second.

    Remodeling's 2025 Cost vs. Value Report puts a vinyl window job at $22,073 and 75.5% recouped at resale, with wood at about 70%. This Old House's resale guide cites 60% to 70%, an older range than the 2025 report.

    The benchmark job is a standard 10-window vinyl replacement priced far above the survey averages, about $2,200 per window, so the recoup percentage describes a premium project, not the estimator's output.

    Energy savings are smaller than the sales pitch. ENERGY STAR's October 2023 estimates put annual savings at $493 to $568 for replacing clear single-pane windows and $253 to $373 for clear double-pane, depending on zone.

    Spread the $7,150 mid scenario over those savings and the single-pane case pays back in about 13 to 15 years, while the double-pane case takes about 19 to 28 years. ENERGY STAR models a typical home, so a partial replacement saves less. The payback check under the estimator runs the same math on your own total.

    Failing sashes, leaks and rot justify replacement, and so does single-pane glass. Sound double-pane windows are the ones to wait on if savings are the only reason.

    Before spending, a home energy audit shows whether the windows or the attic and walls are losing the heat.

    Incentives shrank in 2026. The federal 25C credit covered improvements placed in service through December 31, 2025, and the IRS confirms windows installed after that date no longer qualify.

    Local programs still exist. Cape Light Compact in Massachusetts pays $75 per window in 2026 for ENERGY STAR Most Efficient units that replace single-pane windows, and existing windows must be verified before installation. Check eligibility before ordering.

    Window Replacement Cost Estimator FAQ

    Is it cheaper to repair a window than replace it?

    For isolated damage, yes. Angi puts the average repair near $400, and Fixr's January 2026 data lists most repairs between $150 and $600. This Old House says widespread or worsening damage usually makes replacement the better long-term investment.

    How long does window replacement take?

    The installation itself is quick. A basic replacement can take under an hour, and skilled installers replace 10 to 15 windows per day. The wait before installation is longer. Angi puts the full timeline from hiring to finish at four to 15 weeks, and custom windows add manufacturing time.

    Can I install replacement windows myself to save labor?

    Technically, but it takes advanced carpentry skills. Pella notes that some manufacturer warranties require professional installation to stay valid. Pre-1978 homes add a lead question. EPA's rule generally does not cover homeowners working on their own homes, though the agency recommends hiring a lead-safe certified contractor.

    Does replacing only the glass cost less than a new window?

    When the frame and sash are sound, glass-only replacement is the cheaper job. Angi puts it at $285 per window on average, with most homeowners paying $181 to $414. If the frame itself is warped or rotted, new glass won't fix it, so replace the whole unit.

    Which time of year is cheapest for window replacement?

    Winter, according to Today's Homeowner. Demand drops in winter, and many retailers and contractors offer discounts then. Some installers point to spring promotions instead, so compare current offers. The same publication adds that the best time to replace windows is when the home needs them.

    Are financing options available for window replacement?

    They exist, though fewer homeowners use them. In This Old House's 2026 survey, 15% of homeowners financed their project, down from 30% in late 2025. Of the 2026 financed projects, 49% used in-house company financing. Compare that rate and its fees against a home equity or personal loan before signing.

    Prioritizing Windows When the Estimate Exceeds the Budget

    When a window replacement cost estimator returns more than the budget allows, replace the failing windows first and phase the rest by heat loss. Water that gets past a failed seal or sill spreads into framing and trim, which turns a unit swap into a full-frame repair.

    Leaking, rotting or seal-failed units go first. Single-pane windows rank second, because ENERGY STAR's zone figures put their annual savings at roughly 1.5 to 2 times those of clear double-pane windows. Sound double-pane windows can wait.

    Phasing costs something too. You forgo the larger-order discounts installers often offer, and you end up with two generations of windows on one facade.

    This order reflects 2026 prices and incentive rules as checked on November 15, 2026. A federal window credit returning would move energy-driven replacements higher on the list.

    Sources

    • This Old House, Window Replacement Cost (2026 survey): thisoldhouse.com/windows/reviews/window-replacement-cost
    • Fixr, Window Replacement Cost (updated January 21, 2026): fixr.com/costs/window-replacement
    • Angi, Window Replacement Cost (2026 data): angi.com/articles/how-much-does-window-replacement-cost.htm
    • Angi, Window Prices by Size (2026 data): angi.com/articles/window-prices-by-size.htm
    • Remodeling, 2025 Cost vs. Value Report: jlconline.com/cost-vs-value/2025/
    • ENERGY STAR, Average Annual Energy Savings by Climate Zone (October 2023): energystar.gov
    • PNNL, Building America Solution Center, High-Performance (ENERGY STAR) Windows: basc.pnnl.gov
    • US EPA, Renovation, Repair and Painting Program: epa.gov/lead
    • IRS, FAQs on Public Law 119-21 energy credit changes: irs.gov
    • Thompson Creek, Window Replacement Cost by Home Type (2026): thompsoncreek.com
    • ConsumerAffairs, Window Installation Cost (2026): consumeraffairs.com