How to Use This Siding Cost Estimator
This siding cost estimator prices a re-side job from your wall area, a material and the extras most quotes include. It opens on a 2,000 sq ft, two-story example house, so you can change one input at a time and watch the total move.
- Choose From footprint for a quick number, or Measured walls to enter each wall's width and height.
- Add gables, then the windows, doors and any garage door so they come off the wall area.
- Pick a material. The installed rate fills in with a typical figure; type your own if you have a quote.
- Turn extras on or off, set a contingency, and use Copy estimate to keep the line items for contractor calls.
- Leave the waste factor at 10% unless your rate already includes waste.
- The material bars below the estimator show what the same walls cost in every siding type.
- Nothing you type leaves your browser, and no email or phone number is needed.
Most whole-house siding jobs come in at $8,500 to $20,000, going by Fixr's January 2026 pricing. Where yours lands in that band depends mostly on wall area and siding material, with the number of stories nudging it a bit further either way. A siding cost estimator turns those inputs into a range you can use to set a budget before you ask anyone for written quotes.
Published ranges don't match each other, though. This Old House's June 2026 figures run from $8,000 to $30,000, which means the pool of jobs behind a calculator matters about as much as its formula.
What Does a Siding Cost Estimator Calculate?
Wall area goes in, along with a siding material and a labor rate, and a low-to-high installed price comes out. That's the whole job. It's a budget range and not a bid, so no contractor is bound to it.
Underneath, the formula takes net wall area plus a waste allowance, multiplies it by the installed rate for the material you picked, then adds removal and extras on top.
Some online siding tools ask for as few as 5 inputs: home square footage, number of stories, how complicated the footprint is, siding type, and a ZIP code for local rates. With that little to go on, the output has to cover a lot of ground.
An estimator gives you a range off a handful of inputs, with nobody visiting the house. A per-square-foot guide is plainer still, since it hands you one rate and the multiplying is on you. The contractor quote comes last, written up after someone has measured the walls and looked at what condition they're in.
It's the same quantity-times-unit-price logic you'd use when estimating construction costs for a whole build, just shrunk down to one trade.
Use the range as a starting point for contractor conversations. It isn't a number to sign.
How Do You Measure Wall Area and Siding Squares?
Start with each wall as a rectangle and add the gable triangles on top. Take out the windows and doors, then pad the total for waste. Squares come last, and you get them by dividing by 100, since 1 square is 100 square feet.
So a wall total of 1,800 square feet works out to 18 squares. Angi points out that siding can be sold by the square but still suggests doing the math in square feet.
Calculating net wall area
Angi's formula adds up the rectangular walls, any angled sections and the soffits, then subtracts the windows and doors. Rectangular walls are base x height, one wall at a time. Gables are (base x height) / 2. Soffits are width x length. Every window and door gets width x height and comes off the total.
Plenty of homes use the same window all the way around, so you can often measure one opening and multiply. That's why the estimator asks for a window count and one area per window.
Contractors call this a takeoff. Doing a careful one on paper catches mistakes before they show up as line items on a quote.
Adding the waste factor
HomeAdvisor adds 10% to the measured area to cover waste, gables, windows and errors.
Fine on its own, but its materials range of $1 to $12 per square foot already includes 10% for waste and fasteners. Add 10% to the area and then multiply by a rate that carries it too, and you've paid for the waste twice. Read what the rate includes before you add a waste line, and set the estimator's waste factor to 0% if it's already in the rate.
What Does Siding Cost per Square Foot by Material?
Vinyl has the lowest installed average in This Old House's table, with fiber cement above it. But the published ranges overlap so much that no single source's low end is safe to budget on.
Fixr last updated its table on January 23, 2026. This Old House's figures are dated June 12, 2026 and draw on the Homewyse construction cost database, while HomeAdvisor doesn't show an update date at all.
| Material | Fixr, installed per sq ft | HomeAdvisor, per sq ft | This Old House, average installed per sq ft |
|---|---|---|---|
| Vinyl | $3 to $12 | $3 to $12 | $6.13 |
| Fiber cement | $5 to $14 | $5 to $13.50 | $9 |
| Wood (cedar at This Old House) | $2 to $15 | $2 to $5 | $11.70 |
| Aluminum | $3 to $10 | $2 to $5 | $7.32 |
| Stucco | $7 to $17 | $5 to $6 | $9.66 |
Brick and natural stone sit above everything else in both the Fixr and HomeAdvisor tables, and they rarely belong in a standard estimator slider anyway.
Wood is the messiest row. Fixr runs $2 to $15, HomeAdvisor $2 to $5, and This Old House puts cedar at $11.70. Stone veneer splits too. Fixr lists $5 to $11, while This Old House shows $14.16 in its table and $28 to $51 in its own summary. Vinyl is more of a quirk. This Old House's table average of $6.13 sits inside the $3 to $12 band its summary gives, so one page ends up mixing an average and a range.
HomeAdvisor lists labor separately at $1 to $4 per square foot and doesn't label its material table as installed. A material-only figure and an installed figure can't share a column.
My working rule is to budget on the span where at least 2 sources overlap. For vinyl that's $3 to $12, and for fiber cement it's $5 to $13.50. The single-point averages from This Old House fall inside both. Those overlap bands are the low and high ends the estimator uses for vinyl and fiber cement.
Hardie board is James Hardie's brand of fiber cement siding, not a separate material. Price it off the fiber cement row.
How Much of the Price Is Installation Labor?
Labor runs $1 to $4 per square foot, the same band in both HomeAdvisor and Fixr, which converts to $100 to $400 per square. Where a job lands inside it depends partly on the material, since fiber cement boards are heavier than vinyl and take more labor to cut and hang (Homeyou, 2026). HomeAdvisor also ties the rate to how difficult the install is, and says it shifts with where you live.
Fixr's vinyl siding guide puts labor at 30% to 50% of the total. The other main cost pages cited here don't publish a labor percentage, but you can back one out by subtracting This Old House's material column from its installed column.
For vinyl, $6.13 installed minus $3.16 material leaves $2.97. Fiber cement comes to $3.63 ($9 minus $5.37), and brick veneer to $4.70 ($20 minus $15.30).
All of that comes from the This Old House per-square-foot table. Vinyl and fiber cement land inside the $1 to $4 band and brick veneer doesn't, so a flat band understates masonry.
Which Extra Costs Do Most Siding Estimators Leave Out?
The base per-square-foot rate doesn't cover removal and disposal, house wrap, trim, soffit and fascia, or permits. Each one needs its own line.
HomeAdvisor's guide says removing the old siding or laying new over it changes the price, but it never gives a figure. When an estimate shows one total and nothing else, these lines are usually missing.
Removal and disposal runs $1,000 to $2,500 in Fixr's numbers, depending on material weight and condition. This Old House works examples at $1,000 for 1,500 square feet of vinyl and $2,000 for 2,000 square feet of fiber cement.
House wrap costs $0.50 to $1 per square foot, according to This Old House. DuPont describes Tyvek HomeWrap as a membrane that holds out air and bulk water while letting interior moisture vapor escape.
Some builds skip the separate wrap entirely. Huber's ZIP System sheathing has a water-resistive barrier built into the panel, so the barrier cost shows up inside the sheathing price instead. Weigh ZIP System sheathing against a standard house wrap before you price the wall, and untick the house wrap line if your walls already have it.
Fixr prices trim, soffit and fascia per linear foot, not per square foot, which is why they rarely fit a square-foot formula.
Permits are a mess. Fixr lists $150 to $1,500 and This Old House lists $100 to $500. That gap is wide enough that your local building department's fee schedule beats either number.
Before trusting any result, check whether it shows removal, wrap and trim as separate lines. If it doesn't, add them yourself.
How Do House Size, Stories and Location Change the Estimate?
Living area is only a rough stand-in for wall area, and wall area is the number an estimator really needs. Size drives how much siding you buy. Stories and layout affect the labor, and region sets the rate.
House size and stories
Fixr's size table puts the siding need of a 1,000 square foot home at 1,200 to 1,300 square feet, and a 2,000 square foot home at 1,800 to 2,000 square feet. Smaller homes carry more wall per square foot of floor.
Fixr says the number of stories and the layout, openings included, affect how much siding is required, but it publishes no price per story. The estimator handles stories through wall height, so a second story doubles the wall area rather than adding a guessed surcharge.
Horizontal lap is the most affordable style. Board and batten and diagonal layouts add labor and materials, and brick, stone and stucco push labor costs up.
Measure the walls instead of converting from floor area.
Regional pricing
Fixr says labor rates vary by region and that climate can influence which materials are appropriate or required.
A national range works fine as a sanity check and badly as a local price. For market-level numbers, the Cost vs Value Report lets you filter job costs by region and market. None of the sources publishes a regional multiplier, which is why the estimator's local price adjustment is a slider you set yourself.
Whole-house totals by source
The published whole-house totals don't line up with each other.
- Fixr's January 2026 page gives a $14,500 average and calls $8,500 to $20,000 typical.
- This Old House (June 2026) says $8,000 to $30,000 for most homes, with a $19,000 average project.
- HomeAdvisor shows no update date and lists $5,400 to $16,000, about $10,750 on average.
- Zonda's Cost vs Value report (2025) has national job costs of $17,950 for vinyl and $21,485 for fiber cement, both for 1,250 square feet of siding.
Intersecting the three typical ranges leaves $8,500 to $16,000. Fixr sets the floor, HomeAdvisor sets the ceiling, and the This Old House range contains both.
The Cost vs Value job costs sit above that ceiling. Each source builds its figure from a different pool of jobs, so none of the four is a verified local price.
Fixr's own FAQ and size table even disagree on the top end for the same 2,000 square foot home.
How Do You Estimate Siding Cost for a 2,000-Square-Foot House? A Worked Example
A two-story home with a 40 by 25 foot footprint prices out at $19,230 in vinyl and $25,665 in fiber cement before contingency, using the inputs below. These are the estimator's default inputs, so it opens on the vinyl figure and shows the fiber cement one when you pick that material.
The rates are assumptions inside the overlap bands from the material section, and they exclude waste. Swap in the rate from a real quote when you have one.
- Settle the inputs first. The walls are 16 feet high (two 8 foot stories), there are 16 windows at 15 square feet each and 2 doors at 20 square feet each, and both gables have a 6 foot rise.
- Gross wall area comes from the 130 foot perimeter x 16 feet = 2,080 square feet. Add two gables at (25 x 6) / 2 = 75 square feet each and the total is 2,230 square feet.
- Openings add up to (16 x 15) + (2 x 20) = 280 square feet, so net wall area is 2,230 - 280 = 1,950 square feet.
- Waste is 1,950 x 1.10 = 2,145 square feet, applied once because the rates exclude it.
- For the walls themselves, vinyl at $6 per square foot gives $12,870. Fiber cement at $9 gives $19,305.
- The extras are the same for both builds. Removal and disposal is $2,000, house wrap is 1,950 x $0.80 = $1,560, the trim, soffit and fascia allowance is $2,500, and the permit is $300. That totals $6,360.
- Add it up. Vinyl is $12,870 + $6,360 = $19,230, and fiber cement is $19,305 + $6,360 = $25,665.
| Case | Vinyl | Fiber cement |
|---|---|---|
| Low, no contingency | $19,230 | $25,665 |
| Mid, 10% contingency | $21,153 | $28,232 |
| High, 15% contingency | $22,115 | $29,515 |
The contingency rows work as a contingency allowance for hidden damage that turns up after tear-off, since nothing in the base formula covers it.
Net area lands inside the range Fixr's size table gives for a home this size. Before contingency, the vinyl total sits about 7% above Zonda's national vinyl job cost, and fiber cement sits about 19% above its national figure. Zonda's job covers only 1,250 square feet of siding, though, so per square foot of wall this house comes in lower: $9.86 against $14.36 for vinyl, and $13.16 against $17.19 for fiber cement.
Going from vinyl to fiber cement adds $6,435. The extras add $6,360 to either build, which is almost the same amount.
If a source's installed rate already folds in wrap or trim, drop that line. Counting it twice is the most common way a worked estimate drifts high.
When Does a Siding Cost Estimator Stop Being Reliable?
A square-foot formula only works when nothing odd is hiding behind the siding or under the paint, and when the data feeding the calculator is any good.
Hidden moisture damage
HomeAdvisor's 2025 wood siding repair guide advises budgeting 10 to 15% above the initial estimate for hidden rot or structural damage.
Fixr notes that tearing off old siding can reveal hidden rot, water damage or insect activity. An estimator can't see the sheathing, and the damage surfaces only after tear-off.
Put a per-sheet sheathing price in the contract so extra work arrives as a signed change order rather than a surprise.
If the walls show stains, soft spots or swollen trim, treat the contingency row as part of the base price.
Asbestos-cement siding
Some older siding shingles are made of asbestos cement. EPA's homeowner guidance says asbestos material in good condition is generally best left alone, since fibers are released when it's damaged or disturbed.
Removal is where the price changes. The same guidance calls for a trained professional when the material is damaged or when you plan changes that would disturb it, and OSHA treats removal of asbestos in roofing and siding shingles as Class II asbestos work.
The main cost pages reviewed for this article give no per-square-foot price for abatement. HomeAdvisor's separate siding repair guide lists asbestos siding removal at $9 to $10 per square foot and testing at $230 to $785, so treat any printed figure as a rough guide and get a lab test and a licensed quote first. The estimator's asbestos line starts at $9.50 per square foot plus $500 for testing.
Lead paint under old siding
The federal government banned lead-based paint for homes in 1978, and EPA warns that renovation in a pre-1978 home with lead paint can easily create dangerous lead dust.
EPA's Renovation, Repair and Painting Rule covers renovation, repair and painting work that disturbs paint in pre-1978 housing. The rule generally does not apply to homeowners working on their own home.
A hired siding crew in a pre-1978 home needs lead-safe certification, and that certification and the work practices behind it aren't a line in a basic estimator. Ask any contractor on a pre-1978 house whether the quote includes lead-safe work.
National averages and mixed data pools
A national average is not a local price.
This Old House describes its figures as national averages based on its research at the time of publication, and they vary by location, contractor and project scope. Fixr's siding replacement page gives no regional price figures.
Fixr builds its numbers from pricing databases plus input from licensed contractors and industry experts. That's a different pool from the other sources, which explains part of why the totals never reconcile.
How Do You Check an Estimate Against Contractor Quotes?
Get at least three written quotes and force each one into the same line items. Then compare the totals against the estimator's range. When a quote lands far from it, ask about scope before you ask about price.
The FTC says a written estimate should describe the work, the materials, the completion date and the price. A quote that gives only a total fails that test.
Write each quote's scope into a scope of work and check the same items every time.
- Is removal and disposal included, or left out?
- House wrap and flashing, covered or not
- Which trim, soffit and fascia the quote covers
- Who pulls the permit, and who pays for it
- How hidden sheathing damage is priced
A simple construction estimate template with one row per line item and one column per contractor shows the gaps at a glance. The estimator's copied breakdown uses the same line items, so it can be your first column.
The FTC advises against automatically choosing the lowest bidder and asks you to request an explanation for big differences among estimates. Iowa's attorney general adds caution about unusually low bids that do not explain materials, labor or scope.
A quote far below the estimator range has usually skipped a line somewhere. If one comes in well above it, look for a repair or a premium product you never asked for.
Siding Cost Estimator FAQ
Is it cheaper to repair siding than to replace it?
Yes, up to a point. Once repairs approach half the replacement cost, Fixr says it's time to replace, and it adds siding near the end of its lifespan and ongoing leaks to the signs. Angi adds that water damage, mold or wood rot behind the siding points to full replacement, because the old siding has to come off anyway.
How much does DIY siding installation save?
Labor is the line you remove. Angi's fiber cement installation guide puts a 2,000 square foot DIY job at about $10,000, roughly half what a professional would charge. Coverage is the catch. This Old House notes that many 30-year fiber cement warranties, which protect against improper installation and product failure, are not available to DIY installers.
When is the cheapest time of year to side a house?
Fall and early winter. Fixr says peak siding season runs from late spring through summer, and that scheduling in fall or early winter can reduce labor costs, depending on climate and material availability.
How much more does insulated vinyl siding cost?
About $3 to $5 more per square foot, comparing the ends of the two bands. Fixr's January 2026 vinyl guide prices standard residential grade at $4 to $7 and insulated grade at $7 to $12. Angi puts insulated vinyl at about $8 per square foot on average, with premium insulated grades at $8 to $12, so confirm the grade on every quote.
How long does siding last?
Angi puts siding lifespan anywhere from 20 to 100 years, depending mostly on the material. Vinyl runs 20 to 40 years and aluminum 20 to 60. Brick and stone can last 100 years or more with proper maintenance, but they cost more. Warranties run on a different clock. Consumer Reports says most warranties cover product defects for the first homeowner's lifetime.
Do online siding cost estimators ask for personal information?
Not all of them. Some show local costs without any personal details and only ask for a ZIP code to localize rates. An estimator that asks for a phone number or email before it shows a range is collecting a lead, so check the form first. This one asks for nothing personal and runs entirely in your browser.
Is Fiber Cement Worth the Premium Over Vinyl?
Once a siding cost estimator has returned its range, fiber cement earns its premium over vinyl at resale. Zonda's 2025 Cost vs Value Report shows $24,420 recovered for fiber cement against $17,313 for vinyl.
Fiber cement costs $3,535 more in that report and returns $7,107 more, which leaves $3,572 of net gain over vinyl.
Vinyl recoups 96.5% of its cost, so a seller on a tight budget gives up only $637 by choosing it.
The 113.7% fiber cement return is a national average. Check the report's market filter for your region before committing.
Those percentages come from the 2025 edition, checked in November 2026. A newer edition will reset them.
Sources
- Fixr, Siding Replacement Cost (updated January 23, 2026): https://www.fixr.com/costs/siding-replacement
- Fixr, Vinyl Siding Cost (updated January 28, 2026): https://www.fixr.com/costs/vinyl-siding
- This Old House, Siding Replacement Cost (June 12, 2026): https://www.thisoldhouse.com/siding/siding-replacement-cost
- This Old House, Fiber Cement Siding Cost: https://www.thisoldhouse.com/siding/fiber-cement-siding-cost
- HomeAdvisor, Siding Cost: https://www.homeadvisor.com/cost/siding/
- Homeyou, Siding Cost: https://www.homeyou.com/siding-cost
- Zonda, Cost vs Value Report 2025: https://www.jlconline.com/cost-vs-value/2025/
- EPA, Protect Your Family from Exposures to Asbestos: https://www.epa.gov/asbestos/protect-your-family-exposures-asbestos
- EPA, Lead Renovation, Repair and Painting Program: https://www.epa.gov/lead/lead-renovation-repair-and-painting-program
- OSHA, 29 CFR 1926.1101 Asbestos: https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.1101
- FTC, How To Avoid a Home Improvement Scam: https://consumer.ftc.gov/articles/how-avoid-home-improvement-scam
- Iowa Attorney General, Home Improvement and Contractor Tips: https://www.iowaattorneygeneral.gov/for-consumers/general-consumer-information/home-property/home-improvement-contractor-tips
- Consumer Reports, Siding Buying Guide: https://www.consumerreports.org/home-garden/siding/buying-guide/